New products

Type I is mainly used in Australia, New Zealand, Papua New Guinea, China and Argentina. This 10 amp plug has two flat 1.6 mm thick blades, set at 30° to the vertical, forming an upside-down V. Their centres are spaced 13.7 mm apart and both prongs measure 17.3 mm in length and 6.3 mm in width. The flat earth blade also measures 6.3 by 1.6 mm, but it is 20 mm long. The distance between the centre of the grounding pin and the middle of the plug is 10.3 mm. There is an ungrounded version of this plug as well, with only two flat V-shaped prongs. Both plug versions have insulated live and neutral pins, so even if the plug is not fully inserted into a socket, touching the exposed part of the prongs can’t give you a shock. A plug/socket configuration rated at 15 amps is also available, but the ground pin is wider: 8 mm instead of 6.3 mm. A standard 10 amp plug will fit into a 15 amp outlet, but a 15 amp plug only fits this special 15 amp socket. There is also a 20 amp plug whose prongs are wider still. A lower-amperage plug will always fit into a higher-amperage outlet but not vice versa. Australia’s plug/socket system is codified as standard AS 3112. Although there are slight differences (the pins of Chinese plugs are 1 mm longer and the sockets are installed with the earth contact facing upwards), the Australian plug mates with the socket used in the People’s Republic of China (mainland China). The reason as to why the dimensions of the Australian type I are very similar to those of type A is because the Australasian standard is actually an obsolete type of American plug. It was patented in 1916 by Harvey Hubbell II, the same electrical engineer who had invented the type A plug. Hubbell’s three-blade design never proved popular in the U.S. because of its incompatibility with the existing type A plug, but it was favoured in Australia over the British type D system, because it was easier for local manufacturers to make plugs with flat pins rather than round ones. In the 1930s, the predominant Australian electrical accessory manufacturers, along with the State Electricity Commission of Victoria, decided to standardize on Hubbell’s design.

Type G is mainly used in the United Kingdom, Ireland, Cyprus, Malta, Malaysia, Singapore and Hong Kong. This 13 amp plug has three rectangular prongs that form an isosceles triangle. The central earth pin is 4 by 8 mm and 22.7 mm long. Line and neutral pins are 4 by 6.35 mm and 17.7 mm long, on centres spaced 22.2 mm apart. The centre-to-centre distance between the earth pin and the middle of the imaginary line connecting the two power pins is 22.2 mm. The 9-mm long insulated sleeves prevent accidental contact with a bare connector while the plug is partially inserted. British Standard BS 1363 requires use of a three-wire grounded and fused plug for all connections to the power mains. Two-wire class II appliances are not earthed and often have a plastic grounding pin which only serves to open the shutters of the outlet. The lack of such an earth pin on a type C plug makes it impossible to connect it to a type G receptacle, although it can actually be forced into the socket by sticking a pointy (dry, non-metallic !) object into the centre hole of the power outlet, which opens up the two other holes. Just to be perfectly clear, this is not a piece of advice; it’s simply an observation! In the UK, the power sockets in a house are connected by means of ring circuits, which are protected by 32 A circuit breakers. This type of wiring is rarely used outside the UK and requires the use of fused plugs. Small appliances, like mobile phone chargers, usually have a 3 A cartridge fuse inside the plug; heavy duty appliances, such as coffee makers, have a plug with a 13 amp cartridge fuse. Almost everywhere else in the world radial circuits are used. In this system each wall socket, or group of sockets, has a circuit breaker at the main switchboard, so there is no need for plugs to be fused. As a result, if you take some foreign appliance to the UK, you can use an adaptor, but technically it must incorporate the correct value fuse. Most would have a 13 amps one, too big for computers for example. Type G plugs and sockets started appearing in 1946 and the standard was first published in 1947. By the end of the 1950s, it had replaced the earlier type D outlets and plugs (BS 546) in new installations in the UK, and by the end of the 1960s, most earlier installations had been rewired to the new standard. Type G wall sockets almost always include switches for extra safety. UK plugs are no doubt among the safest in the world, but also among the most hulking and cumbersome. That’s why people often make fun of them saying that a British plug is mostly bigger than the appliance it is connected to… Moreover, the bottom-heavy design of the plug makes it a perfect caltrop.

Type C is used in all countries of Europe except the United Kingdom, Ireland, Cyprus and Malta. Type C is probably the single most widely used international plug. This two-wire plug is ungrounded and has two round prongs. It is popularly known as the Europlug which is described in CEE 7/16. The plug has two 4 mm round pins, measuring 19 mm in length on centres spaced 18.6 mm apart at the base and 17.5 mm apart at the tip. The two pins have 10 mm long insulated sleeves. They converge slightly, but they are relatively flexible which allows the plug to mate with any socket that accepts 4.0 – 4.8 mm round contacts on 17.5 – 19 mm centres. The plug is generally limited for use in class II applications that require 2.5 amps or less. It is, of course, unpolarised. It is commonly used in all countries of Europe except in the United Kingdom, Ireland, Cyprus and Malta. It is also used in various parts of the developing world. Whereas type C plugs are very commonly used, this is not the case for type C sockets. This kind of socket is the older and ungrounded variant of socket types E, F, J, K or N. Nowadays most countries demand grounded sockets to be installed in new buildings. Since type C sockets are ungrounded, they have become illegal almost everywhere and they are being replaced by types E, F, J, K or N (depending on the country). So as to leave no doubt: only the sockets have become illegal, the plugs remain in use of course. A type C plug fits perfectly into a types E, F, J, K or N socket. This product is a passive device and does not convert voltage. Any item plugged in must already be compatible with the voltage being supplied by the socket. Rated: 10A/250V Insulated Voltage-Proof: 3 KV Materials Shell: ABS (UL-94HB) Plug Plate: ABS (UL-94VO) Safety Certification: CE Marking  

Type E is primarily used in France, Belgium, Poland, Slovakia, the Czech Republic, Tunisia and Morocco. France, Belgium and some other countries have standardized on a socket which is different from the CEE 7/4 socket (type F) that is standard in Germany and other continental European countries. The reason for incompatibility is that grounding in the E socket is accomplished with a round male pin, which is permanently mounted in the socket. This earth pin is 14 mm long and has a diameter of 4.8 mm.  The plug itself is similar to C except that it is round and has the addition of a female contact to accept the socket’s grounding pin. The plug has two 4.8 mm round pins, measuring 19 mm in length on centres spaced 19 mm apart. The centre-to-centre distance between the female contact and the middle of the imaginary line connecting the two power pins is 10 mm. In order to bridge the differences between sockets E and F, the CEE 7/7 plug was developed (see photo on the left): it has grounding clips on both sides to mate with the type F socket and a female contact to accept the grounding pin of the type E socket. The original type E plug, which does not have grounding clips, is no longer used, although very rarely it can still be found on some older appliances. Note that the CEE 7/7 plug is polarised when used with a type E outlet. The plug is rated at 16 amps. Above that, equipment must either be wired permanently to the mains or connected via another higher power connector such as the IEC 60309 system. A type C plug fits perfectly into a type E socket. The socket is recessed by 15 mm, so partially inserted plugs do not present a shock hazard. 10~16A/250V 4.8 mm, 4.8 mm prongs Insulated Voltage - Proof: 3KV CE Approved RoHS compliant Note: Plug adapters do not convert voltage, they just change the plug type. Use a proper voltage converter along with a plug adapter if your device is incompatible with the country's voltage.

Key Features:Converts 2-prong US plug into 2-prong European/Asian plug*Doesn't convert voltage This adapter does not convert the voltage from 220 volts to 110 volts. It only changes the plug type from flat pin to round pin. It primarily used for dual voltage items or in conjunction with voltage converter/transformer.

Key Features:Converts 2-prong European/Asian/Australian plug into 2-prong US plug*Doesn't convert voltageWorld Plug Adapter Chart This adapter does not convert the voltage from 220 volts to 110 volts. It only changes the plug type from flat pin to round pin. It primarily used for dual voltage items or in conjunction with voltage converter/transformer.

Operate 120V North American power small electronics, motorized appliance rated up to 50 watts e.g. Answering Machine, Radio Tape Recorders, AC adapters/chargers of Cameras, iPod, etc. And heating-type appliance rated up to 1875 watts e.g. Hair Dryers, Travel Irons, Heating Pads, Steamers, Food/Bottle Warmers etc. Used in countries having 220/240V AC Power. This Seven Star SS225 converter will work in Europe (UK will require plug adapter), Asia, Australia, Africa, the Middle East, and South America. Please be aware that there are other voltage converters out there on the market that sell for less money, but most of them have problems working with higher wattage hair tools. Why take a chance? This is a proven product! Input: 220/240V AC 50/60Hz Output: 110/120V AC Switchable Low-High Wattage Settings 50 Watts or 50 -1875 Watts Selector Switch Converts 220 volt to 110 volt to use North American Appliances Overseas For Use With Shavers, Radios, Telephones, Chargers, Hair Dryers, Coffee Cup Heaters, Irons etc. Warning: Do not use power tools or electronics circuitry (i.e. Computers, Fax Machines, TV's, VCR's etc.).

Seven Star SS204, 1600 Watt, Converts 220 Volt to 110 Volt, For Use With American 110 volts Coffee Pots, Hair Dryers etc in foreign countries on 220 voltage   Allows North American 120 volt products to be used abroad with 220 volts Converts 220/240 volt foreign electricity to North American 110/120 volt electricity. Up to 1600 watts capacity For use with appliances with heating elements (non-motorized) like travel Irons, Hair Dryers, Coffee pots, heating pads Note: This is a solid state converter and it is not designed for continuous use.  

100 Watts, Compact Plug-in Type, Converts AC220-240V 50Hz to AC110-120V 50Hz or AC110-120 Volt 60Hz to AC220-240 Volt 60Hz, Universal Socket Outlet accepts most type of plugs, Thermal fuse protection, CE Mark 100 Watts, Compact Plug-in Type, Converts AC220-240V to AC110-120V or AC110-120 Volt to AC220-240 Volt, Universal Socket Outlet accepts most type of plugs, Thermal fuse protection, CE Certified Maximum 100 Watts AC/AC Power Converter Compact size Plugs directly into the US style wall electrical oulet Plug adapter for Europe/Asia included (two round pins) Converts AC220-240 Volt to AC110-120 Volt or AC110-120 Volt to AC220-240 Volt  Built-In Thermal Fuse Universal Socket Outlet accepts most type of plugs Safety Protect from Overload Voltage Input Selector Switch (110/220 Volt) Ideal for electrical appliances like Battery Charger, CD Player, Cordless Phones, Video Game Adapters. CE APPROVED Weight 1 lb 8 oz

100 Watt 220/240V to 110/120V AC - Step Down Travel Converter Converts 220/240V AC foreign electricity to 110/120V AC 50/60HZ Pure AC Output for use with all types of appliances rated 1-200 Watts 100 Watt 220/240V to 110/120V AC - Step Down Travel Converter If you're planning on taking the item abroad, please be aware that most likely you will have to get an adapter for the outlet on your destination

200 Watt 220/240V to 110/120V AC - Step Down Travel Converter Converts 220/240V AC foreign electricity to 110/120V AC 50/60HZ Pure AC Output for use with all types of appliances rated 1-200 Watts 200 Watt 220/240V to 110/120V AC - Step Down Travel Converter If you're planning on taking the item abroad, please be aware that most likely you will have to get an adapter for the outlet on your destination

The AR Series Step Up / Step Down Voltage Converter with Regulator (Stabilizer) provides a stable source of power for all major appliances and sensitive electronics. Each model is CE approved and certified.In addition to converting 220/230/240 volts to 110/120 volts and visa versa, these voltage regulator transformers will stabilize either 120 volts or 220 volts. What that means is they will provide stabilized 120 volts when the input is 120v as well as providing a constant stabilized 220 volts when the input is 220/230/240 volts. The input parameters for stabilization (regulation) of power are 80 volts – 140 volts and 120 volts – 240 volts. The output is stabilized to either 110 volts or 220 volts +/- 4%.Features:5000 Watt Maximum CapacityChanges 220/240 Volt (Foreign Electricity) to 110/120 Volt (U.S. Electricity)or 110/120 Volt (U.S. Electricity) to 220/240 Volt (Foreign Electricity)On/Off switch with indicator lampHeavy duty transformer for continuous useAnalog voltage meterIntegrated automatic protection circuitVoltage stabilizer, good for countries with unstable voltage supply3 outlets on front of unit (outlets accept 3 or 2 prong US plugs and 2 prong Euro/Asian plugs)Insulated power cord is hard wired with a European Shucko plug also good for Asian outletsHeavy-duty metal casing and durable design to carry with attached handleGrounded European shucko plug also good for Asian outletsComes with 2 prong USA plug to enable non-grounded use in USA, Canada, and MexicoFuse protected - fuse will cut off the current if the transformer is overloaded to protect the transformer and your applianceDimensions: 10" x 10" x 14" (H X W X D) .Weight: 38 lbs

The AR Series Step Up / Step Down Voltage Converter with Regulator (Stabilizer) provides a stable source of power for all major appliances and sensitive electronics. Each model is CE approved and certified.In addition to converting 220/230/240 volts to 110/120 volts and visa versa, these voltage regulator transformers will stabilize either 120 volts or 220 volts. What that means is they will provide stabilized 120 volts when the input is 120v as well as providing a constant stabilized 220 volts when the input is 220/230/240 volts. The input parameters for stabilization (regulation) of power are 80 volts – 140 volts and 120 volts – 240 volts. The output is stabilized to either 110 volts or 220 volts +/- 4%.Features:3000 Watt Maximum CapacityChanges 220/240 Volt (Foreign Electricity) to 110/120 Volt (U.S. Electricity)or 110/120 Volt (U.S. Electricity) to 220/240 Volt (Foreign Electricity)On/Off switch with indicator lampHeavy duty transformer for continuous useAnalog voltage meterIntegrated automatic protection circuitVoltage stabilizer, good for countries with unstable voltage supply3 outlets on front of unit (outlets accept 3 or 2 prong US plugs and 2 prong Euro/Asian plugs)Insulated power cord is hard wired with a European Shucko plug also good for Asian outletsHeavy-duty metal casing and durable design to carry with attached handleGrounded European shucko plug also good for Asian outletsComes with 2 prong USA plug to enable non-grounded use in USA, Canada, and MexicoFuse protected - fuse will cut off the current if the transformer is overloaded to protect the transformer and your applianceDimensions: 10" x 10" x 14" (H X W X D)Weight: 29 lbs

The AR Series Step Up / Step Down Voltage Converter with Regulator (Stabilizer) provides a stable source of power for all major appliances and sensitive electronics. Each model is CE approved and certified. In addition to converting 220/230/240 volts to 110/120 volts and visa versa, these voltage regulator transformers will stabilize either 120 volts or 220 volts. What that means is they will provide stabilized 120 volts when the input is 120v as well as providing a constant stabilized 220 volts when the input is 220/230/240 volts. The input parameters for stabilization (regulation) of power are 80 volts – 140 volts and 120 volts – 240 volts. The output is stabilized to either 110 volts or 220 volts +/- 4%. Features: 2000 Watt Maximum Capacity Changes 220/240 Volt (Foreign Electricity) to 110/120 Volt (U.S. Electricity)or 110/120 Volt (U.S. Electricity) to 220/240 Volt (Foreign Electricity) On/Off switch with indicator lamp Heavy duty transformer for continuous use Analog voltage meter Integrated automatic protection circuit Voltage stabilizer, good for countries with unstable voltage supply 3 outlets on front of unit (outlets accept 3 or 2 prong US plugs and 2 prong Euro/Asian plugs) Insulated power cord is hard wired with a European Shucko plug also good for Asian outlets Heavy-duty metal casing and durable design to carry with attached handle Grounded European shucko plug also good for Asian outlets Comes with 2 prong USA plug to enable non-grounded use in USA, Canada, and Mexico Fuse protected - fuse will cut off the current if the transformer is overloaded to protect the transformer and your appliance Dimensions: 8" x 9" x 12" (H X W X D) Weight: 27 lbs